| Date | - |
|---|---|
| Manufacturer | Seagate |
| Interface | SCSI |
| Media Type | Tape Library |
| Device Attributes | 6-slot integrated loader |
| Capacity | 120GB native/6 slots |
| Compression | No |
| Mac | Windows | |
|---|---|---|
| Status | Qualified | Qualified |
| Minimum Product Required | Desktop | Desktop |
| Minimum Version Required | 4.3 | 5.15 |
| Minimum Driver Update | 2.1 | 2.1 |
| Minimum Firmware | 8240 | 8240 |
| Notes | This drive has a feature that is called "Auto-load", where tapes are always loaded into the drive mech inside the loader. It is so that the drive is always occupied in the loader. This can conflict with Retrospect if enabled. To disable do the following:' Hold the "SELECT" for 5 seconds and you will get a menu. Hit "SELECT" a few times till the "AUTO LOAD" is selected. From there you can hit "ENTER" and use "SELECT" to select the "YES" or "NO" then finally hit "ENTER" |
This drive has a feature that is called "Auto-load", where tapes are always loaded into the drive mech inside the loader. It is so that the drive is always occupied in the loader. This can conflict with Retrospect if enabled. To disable do the following:' Hold the "SELECT" for 5 seconds and you will get a menu. Hit "SELECT" a few times till the "AUTO LOAD" is selected. From there you can hit "ENTER" and use "SELECT" to select the "YES" or "NO" then finally hit "ENTER" |
Qualified - Passed extensive in-house certification. Storage device is fully supported.
Description
Personal