Date | - |
---|---|
Manufacturer | Quantum |
Interface | SCSI |
Media Type | Tape Library |
Device Attributes | DLT, 1 Quantum DLT4000 |
Capacity | 5 or 7 |
Compression | No |
Mac | Windows | |
---|---|---|
Status | Qualified | Qualified |
Minimum Product Required | Desktop | Desktop |
Minimum Version Required | 3.0 | 5.0 |
Minimum Driver Update | N/A | N/A |
Minimum Firmware | ||
Notes | Quantum DLT2700 through -4700 series: A seven-tape Quantum DLT library has four modes which are set using the key on the front of the loader. The modes are Locked, Automatic, Manual, and Service, with each mode's key position designated by an icon. To work with Retrospect, the library must be in Locked or Automatic mode. Changing the Magazine when Retrospect is Open: To eject the magazine, first choose Eject Magazine from Retrospect's devices toolbar. Turn the loader's key to the Automatic position and, after the green light on the loader's Eject button illuminates, press the button. When the door opens, tilt it down to its fully open position and remove the magazine. Load the magazine completely with your desired tapes, replace the magazine in the loader, turn the key to the Locked position, then push the door closed. The first tape is automatically loaded into the drive. Changing the Magazine when Retrospect is Not Open: To change the magazine when Retrospect is not open you need not take any special action. Tape Slot Numbers: The library's door has a number for each tape slot, numbered 0 through 6; ignore these numbers. Consider the magazine slots numbered 1 through 7, corresponding to Retrospect's slot numbers. |
Quantum DLT2700 through -4700 series: A seven-tape Quantum DLT library has four modes which are set using the key on the front of the loader. The modes are Locked, Automatic, Manual, and Service, with each mode's key position designated by an icon. To work with Retrospect, the library must be in Locked or Automatic mode. Changing the Magazine when Retrospect is Open: To eject the magazine, first choose Eject Magazine from Retrospect's devices toolbar. Turn the loader's key to the Automatic position and, after the green light on the loader's Eject button illuminates, press the button. When the door opens, tilt it down to its fully open position and remove the magazine. Load the magazine completely with your desired tapes, replace the magazine in the loader, turn the key to the Locked position, then push the door closed. The first tape is automatically loaded into the drive. Changing the Magazine when Retrospect is Not Open: To change the magazine when Retrospect is not open you need not take any special action. Tape Slot Numbers: The library's door has a number for each tape slot, numbered 0 through 6; ignore these numbers. Consider the magazine slots numbered 1 through 7, corresponding to Retrospect's slot numbers. |
Qualified - Passed extensive in-house certification. Storage device is fully supported.
Description