| Date | 20 October, 2014 |
|---|---|
| Manufacturer | ATTO Technology |
| Interface | Thunderbolt |
| Media Type | Enclosure |
| Device Attributes | - |
| Capacity | - |
| Compression | No |
| Mac | Windows | |
|---|---|---|
| Status | Qualified | Not Tested |
| Minimum Product Required | Desktop | |
| Minimum Version Required | 10.0 | |
| Minimum Driver Update | ||
| Minimum Firmware | ||
| Notes | *****IMPORTANT NOTE***** The following 2 steps are needed in order for Retrospect to work properly with the Thunderlink FC 1082: STEP 1: ---------------------------------------- 1. Open Terminal and run the following command: sudo nvram atto-args-tlfc8="-i 0x800000" 2. Reboot machine. 3. Open Terminal and run the following command to make sure it was set correctly: nvram -p | grep atto You should see the following output: atto-args-tlfc8 -i 0x800000 ------------------------------------ STEP 2: ------------------------------------ 1. In the Retrospect System Preferences pane, stop the Retrospect Engine. 2. Locate the retro.ini file at /Library/Application Support/Retrospect/retro.ini 3. Open the retro.ini file with a text editor, such as TextEdit. 4. Add the following lines to the end of the existing text: [DEVICES] DevUseMaxQuantumKB=256 5. Save the edited retro.ini file. 6. Start the Retrospect Engine in System Preferences pane. |
- |
Qualified - Passed extensive in-house certification. Storage device is fully supported.
Not Tested - Unknown compatibility. This device has not been tested in-house and is not supported.
Description
Personal